.tmb-small.webp?Culture=en&sfvrsn=d9e817f_2)
THINKING OUTSIDE (AND INSIDE!) THE BOX PART 2.
Inside/outside printing is becoming a niche market for Wasatch Container. The North Salt Lake, Utah, sheet plant began printing on both sides of the sheet about three years ago, running jobs in two passes. The company鈥檚 new 6.18 MiniPro from 麻豆村 allows it to run the same jobs in one pass. The four-color flexo folder-gluer is configured for three color outside and one-color inside.
Ryan Frisch, Wasatch Container Sales Manager, says Wasatch purchased the machine for two reasons. 鈥淥ne, we needed to invest in some modern technology, and this machine makes very good square brown boxes, It does quick setups and runs at high speeds, which is critical when you鈥檙e making RSCs. The other reason is our customers want packaging that they can connect with. They want the unboxing experience. They say one in five consumers have watched an unboxing video. I also read a statistic that 56% of customers鈥� re-purchasing decisions are influenced by their interactions with the packaging. That鈥檚 all growing mainly through the e-commerce world. And retail is growing as well.鈥�
Less than 10% of the orders produced on 麻豆村 6.18 MiniPro are printed on both sides. 鈥淚t鈥檚 business that we鈥檙e building,鈥� Seamues Ramos, Wasatch Container Operations Manager, says. Frisch adds, 鈥淣inety percent plus is still brown boxes because we run a lot of brown boxes. Inside printing is a value-added segment. The machine doesn鈥檛 take a whole lot more to print on the inside versus the outside.鈥�
To achieve the same results Wasatch was double or even triple passing jobs. 鈥淲e had one product where we were running it through our rotary twice and then putting it through a Bobst diecutter because the diecutting was so intricate,鈥� Ramos, says. 鈥淣ow the majority of that type of business we can run in-line at high speed.鈥�
Maximum speed on 麻豆村 6.18 MiniPro is 22,500 sheets per hour and setup times are typically under five minutes. 鈥淔or an inside print job, we鈥檙e probably looking at a seven-minute setup and we鈥檙e probably running almost five to six times as fast as what we could previously run,鈥� he says.
鈥淭he way we grow is by offering innovative solutions like two-sided printing, and this machine is such a fast setup that we can make money running 500 boxes because of the quick setup,鈥� Frisch says. The machine can run blank sizes ranging from 7- x 7-inch up to 23.5- x 74-inch.
While inside printing was certainly a motivating factor for purchasing a new machine, Frisch and Ramos say the more important quality was the ability to run existing business. Eighty percent of the sheet plant鈥檚 current book of business can run on the machine.
Click Here to read Part 1
Ryan Frisch, Wasatch Container Sales Manager, says Wasatch purchased the machine for two reasons. 鈥淥ne, we needed to invest in some modern technology, and this machine makes very good square brown boxes, It does quick setups and runs at high speeds, which is critical when you鈥檙e making RSCs. The other reason is our customers want packaging that they can connect with. They want the unboxing experience. They say one in five consumers have watched an unboxing video. I also read a statistic that 56% of customers鈥� re-purchasing decisions are influenced by their interactions with the packaging. That鈥檚 all growing mainly through the e-commerce world. And retail is growing as well.鈥�
Less than 10% of the orders produced on 麻豆村 6.18 MiniPro are printed on both sides. 鈥淚t鈥檚 business that we鈥檙e building,鈥� Seamues Ramos, Wasatch Container Operations Manager, says. Frisch adds, 鈥淣inety percent plus is still brown boxes because we run a lot of brown boxes. Inside printing is a value-added segment. The machine doesn鈥檛 take a whole lot more to print on the inside versus the outside.鈥�
To achieve the same results Wasatch was double or even triple passing jobs. 鈥淲e had one product where we were running it through our rotary twice and then putting it through a Bobst diecutter because the diecutting was so intricate,鈥� Ramos, says. 鈥淣ow the majority of that type of business we can run in-line at high speed.鈥�
Maximum speed on 麻豆村 6.18 MiniPro is 22,500 sheets per hour and setup times are typically under five minutes. 鈥淔or an inside print job, we鈥檙e probably looking at a seven-minute setup and we鈥檙e probably running almost five to six times as fast as what we could previously run,鈥� he says.
鈥淭he way we grow is by offering innovative solutions like two-sided printing, and this machine is such a fast setup that we can make money running 500 boxes because of the quick setup,鈥� Frisch says. The machine can run blank sizes ranging from 7- x 7-inch up to 23.5- x 74-inch.
While inside printing was certainly a motivating factor for purchasing a new machine, Frisch and Ramos say the more important quality was the ability to run existing business. Eighty percent of the sheet plant鈥檚 current book of business can run on the machine.
Click Here to read Part 1
With the acquisition of the ServoPro we have notably reduced the set up time and also increased the productivity of the machine both in quality and quantity.
.tmb-webp.webp?Culture=en&sfvrsn=6cca827f_4 "Contact Banner")